By Kathleen Hickey
So, you've checked out a race or two, or hung out with a local FPV group, and you've decided that you want to fly. What's the next step? There are three ways you can go.
The first would be to purchase a Ready To Fly (RTF) quad. You can purchase a quad that's ready to fly out of the box. Some retailers also offer sets that come with Fat Shark goggles. Some retailers to check out would be Horizon Hobby, or ReadyMadeRC. The benefit of going to RTF route is saving yourself from figuring out various parts, and a build right off the bat. If you have never used a radio or controls of any sort, or if you're completely new to the RC and drone world, a RTF could be a good introduction. You'll want to make sure that the quad you buy has replaceable parts that you can purchase.
The second option would be to build your own quad. I wanted to build my own for various reasons. First, I usually don't take the easy road with most things. I like to really challenge myself. Basically I'm a sucker for punishment. I also knew that I wanted to fly and there was no doubt that this was something I wanted do. Another fact to consider is that you will crash. Crashing your quad is part of the package. The very best pilots crash . The benefit of building your own quad is that you know how to fix it when something goes wrong. You can also customize the parts you'd like to use to make a quad that you like to fly. There are you tube videos on how to build your own, but if at all possible, find someone that is willing to sit down with you and teach you in person. You would be at the mercy of their schedule, and it may take some time to build it, but understanding how the quad works, and how to build it is very valuable.
The third option would be to go to your local hobby shop, and see if they build quads for their customers. You would have to pay for their time to build it, but it's a way of using the second option, without having to go through the build process on your own. You may want to ask if they would be willing to take you through the process, so you can learn what it's like from start to finish. The benefit of going through a shop is you have a real person that you can talk to. Make sure to also get quotes on repairs, and labor for those repairs. I can't say it enough, but you will crash, so it's important to know what that cost will be before you commit to that shop building the quad.
This might be a good time to bring up an important point. There are no absolutes in FPV. From your props to your radio to your quad, everyone has an opinion on what they believe is best. It's important to not get too overwhelmed with advice and suggestions. Also, ask people why. If someone tells you to build your own quad, ask them why they think so. If someone suggests buying a RTF, ask them why. Pilots feel very passionately about what they use, and how they like to use it, and once you find what works for you, you'll feel the same way.
Space One FPV provided my 180mm Frame, four motors, four ESCs, and a flight controller.
I decided to start flying Line Of Sight (LOS) first, before going right to FPV, with goggles. There were two main reasons for this decision. The first was because the people around me recommended that I being LOS first. They believe it's important to see how the quad flies with your eyes first, and learn how to hover, turn, and keep the quad even in the air, before moving on to FPV. Some people believe that you should go right to FPV, and not fly LOS at all. Another determining factor for me was the cost. I could start to fly the quad without purchasing all of the FPV equipment, and parts.
The list of things to purchase is long. And if you're like me, with no previous RC experience, it can be an expensive hobby to get into. Here are a few tips:
- Have an idea of what you want your quad to do, and how you would like to use it. Picking parts for your quad is a chain reaction. The motors, ESCs, Battery, props, FCs, PDBs, everything is connected, and they have to support one another. Before buying things off of friends, or the internet, make sure all of your componets will play nice with each other. Otherwise you are spending money on products that won't work, or will need to be replaced sooner than later.
- What kind of shopper are you? About 90% of the pilots I have spoken to about this topic, suggest that you buy good quality tools and parts from the start. The first reason being that in FPV, you really do get what you pay for. Secondly, it will be more costly in the long run to replace parts on your quad, or your gear because you didnt spend a little extra to begin with. Also, there is resale value. If you decide you don't like a certain part, and it's still in great condition, you have a better chance of selling it. With that being said, I don't suggest you buy the newest latest thing for your first quad build. Purchase reliable, good quality items. You don't need to buy the new hype motors, or ESCs. Not only do you want to avoid "testing" the newest thing when you're building your first quad, but it may also be more difficult to find people that can help, and answer questions if something comes up.
- When planning your budget, allow for extra parts. Don't buy just four motors, props, ESCs, because you just need four. Something may not work. You may damage your quad within the first couple weeks. Nothing is worse than waiting for extra parts to come, especially if that part is now out of stock. You don't need to become a hoarder, but have a few extras around.
Sound daunting? If you just want to get your feet wet, another option is a mini drone, or quad.
This is my Proto-X. There are also other small quads to choose from. They come with remotes, and are a great way to get down flying basics.
Regardless of how you want to do it, one guarantee is that things will break, parts wont work. You will have to replace things, and there are many little tools, parts, and equipment that you'll need. before you start investing, consider the costs and reality of the hobby. You don't want to get to a point where you're so frustrated you'll want to stop.
Up next; The Struggle is REAL! My challenges...until then...
*Very Special Thanks to Erick Robles:
Custom RC Hobby: (626) 993-2999 - IG: customrc1
259 Sierra Madre Villa Ave
Pasadena, CA 91107